Products
STA50813TR 40 V, 4.5 A quad power half-bridge digital audio amplifier
STA508 is a monolithic quad half bridge stage in Multipower BCD technology. The device can be used as dual bridge or reconfigured, by connecting CONFIG pin to Vdd pin, as single bridge with double current capability, and as half bridge (Binary ...
IMP23ABSUTR Analog Bottom MEMS microphone for ultrasound applications
The IMP23ABSU is a compact, low-power microphone built with a capacitive sensing element and an IC interface.The sensing element, capable of detecting acoustic waves, is manufactured using a specialized silicon micromachining process to produce audi...
TCAN1048AV-Q1 is an enhanced automotive dual CAN transceiver with low power standby mode and 1.8V I/O support
The TCAN1046AV-Q1 and TCAN1048AV-Q1 (TCAN104xAV-Q1) are dual-channel high-speed controller area network (CAN) transceivers that meet the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The TCA...
The LM2902LV is a quad 5.5V, 1MHz, 3mV offset voltage op amp
The LM290xLV family includes the Dual LM2904LV Product Specifications, Documentation and Source Information" target="_blank">LM2904LV and the Quad LM2902LV Product Specifications, Documentation and Source Information" target="_blan...
TMP464 is a 5-channel (4 remote and 1 local) high precision remote and local temperature sensor
The TMP464 device is a high precision, ADS1286UB low power temperature sensor C compatible interface using a two-wire, SMBus or I2. In addition to local temperature, up to four remote diode-connected temperature zones can be monitored simultaneo...
The OPA1679-Q1 is a quad, low noise (4.5nV/rtHz), low distortion (120dB) automotive grade amplifier
The dual-channel OPA1678-Q1 and quad-channel OPA1679-Q1 (OPA167x-Q1) op amps provide higher system-level performance than conventional op amps commonly used in audio circuits. The OPA167x-Q1 amplifiers achieve a low noise density of 4.5nV/√...
Accu-P® Series Capacitors
Image of AVX's Accu-P® Series CapacitorsAVX's Accu-P SMD capacitors are designed for soldering to printed circuit boards or other substrates. The construction of the components is such that they will withstand the time/temperature profiles us...
